Tile and grout cleaning for your Boynton Beach home is a task that has to take care of on a regular basis to avoid permanent marks and spots. After you have carried out professional tile and grout cleaning on your tiles, it is important to keep it clean on a regular basis.
Have you started noticing discoloration of tiles in the recent times? The most affected tile floors are bathroom floors and kitchen floors. You might find it very hard to clean it with regular water or detergent. You may not be fully aware, but there are certain simple household methods to remove any floor-based discoloration.
With particular efforts from your side, you can do wonders and get new tiles and grout lines. On the offset that you are facing the same problem of dirty and discolored tiles, these simple do’s and don’t will help you do wonders.
Step by step cleaning process
A proper dusting of the tile floor with a vacuum cleaner or the broom with special attention to the corners
Affected areas should be washed thoroughly with plain water, that will remove the loose and the stuck dirt that are on the surface
Before applying any solution try to a sponge or towel to wipe out the dirt when wet
Mix any one of the solutions that are mentioned below and see which is best suited for your tile surface
Use cleaning gloves while applying the solution or scrubbing it to avoid any reactions on your skin
Use exhaust fans for both kitchen and bathroom surfaces
If fumes is a hindrance for you wear a mask
If it is an intense stain, it might take extra effort in cleaning
Regular cleaning is the best and most efficient way to ensure proper cleaning
Avoid excessive moisture on tile floors
For regular cleaning, you can try some simple home remedies -
Method 1
Start with a paste of baking soda and water and apply it evenly on the grout surface, add a portion of diluted vinegar on the surface
Scrub it thoroughly
After that rinse it with plain water and wipe the surface
Method 2
Apply a solution of oxygenated bleach and warm water on the grout surface
Scrub it thoroughly
Rinse it with plain water and wipe the surface
Method 3
Make a paste of hydrogen peroxide, baking soda, and dish soap
Scrub it properly
Mop it with water and wipe the surface dry
Every once in awhile, at least once a year get professional cleaners to clean your target.
Tile and Grout Cleaning Tips
Test the solution before applying it
Rinse properly with water before using the floor surface
If you opt for oxygen bleach or baking soda, please read the quantity directions correctly
After a thorough cleaning apply grout sealer to keep it fresh for longer hours
Things to avoid in Tile and Grout Cleaning
Avoid hard bristle at all times
Metal brushes harm grouts a lot
Read about the solution before applying it on any surface
Avoid harsh bleach as much as possible
If you have tried these methods yet your tile floors are not clean in Delray Beach, it is time to call Dri & Kleen Home Services for deep cleaning of tiles and grout line. For better attention Call - .
- Print version